Somos® NanoTool



Somos® NanoTool

Somos® NanoTool ermöglicht die Herstellung von harten, steifen, und hitzebeständigen Bauteilen aus Verbundwerkstoff mit hervorragender Oberflächenoptik, verbunden mit Detailtreue. Die Glätte der Oberfläche ermöglicht die Anwendung von Metallbeschichtungen (metal plating), eine Eigenschaft, die immer mehr als schnelle Alternative zum Prototypenbau aus Metall gefordert wird.
Somos®NanoTool ist die ideale Lösung für die Luft- und Raumfahrt, so wie Automobilindustrie.

Mechanical Properties Test Method English Metric
Tensile Strength ASTM D638 8.9-11.3 kpsi 61.7-78.0 MPa
Tensile Modulus ASTM D638 1.590-1.650 kpsi 11,000-11,400 MPa
Elongation at Break ASTM D638 0.7-1.0 % 0.7-1.0 %
Poisson’s Ratio ASTM D638 0.34-0.38 0.34-0.38
Flexural Strength ASTM D790 11.5-17.5 kpsi 79-121 MPa
Flexural Modulus ASTM D790 1.480-1.570 kpsi 10,200-10,800 MPa
IZOD Impact, notched A ASTM D256 0.23-0.29 ft lb/in 0.12-0.15 J/cm
Thermal Properties Test Method English Metric
HDT @ 66 psi ASTM D648-98 437°F 225°C
HDT @ 264 psi ASTM D648-98 185-193°F 85-90°C
Coefficient Thermal Expansion -40-0 °C/-40-32°F ASTM E831 14.1-14.4 μin/in°F 25.3-26.0 μm/m°C
Coefficient Thermal Expansion 0-50 °C/32-122°F ASTM E831 16.9-18.0 μin/in°F 30.4-32.4 μm/m°C
Coefficient Thermal Expansion 50-100 °C/122-212°F ASTM E831 42.2-48.6 μin/in°F 75.9-87.4 μm/m°C
Coefficient Thermal Expansion 100-150 °C/212-302°F ASTM E831 50.1-53.2 μin/in°F 90.0-95.7 μm/m°C
Tg E1545 135-144°F 57-62°C
Other Test Method Value Available Colors
Shore Hardness (A) D2240 93-95
White
Water absorption, % D570-98 0.23 %
Dielectric Strength D149-97a 15.6-16.8 kV/mm
Dielectric Constant @ 60 Hz D150-98 4.0
Dielectric Constant @ 1 Khz D570-98 3.8-3.9
Dielectric Constant @ 1 Mhz D150-98 3.6-3.7
Density @ 25°C - - - - - 1.65 g/cm3

The information presented are typical values intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes.
End-use material performance can be impacted (+/-) by, but not limited to, part design, end-use conditions, etc. Actual values will vary with build conditions.
Product specifications are subject to change without notice.
The performance characteristics of these materials may vary according to application, operating conditions, or end use. Each user is responsible for determining that the material is safe, lawful and technical suitable for the intended laws and regulations. Zare makes no warranties of any kind, express or implied, including, but not limited to, the warranties of merchantability, fitness for a particular use, or warranty against patent infringement.
All information contained in this document were supplied by DSM Desotech Inc. Copyright© 2013
All Trademarks included in this document are property of the respective owner