AlluSinter (PA+Aluminium)



AlluSinter (PA+Aluminium)

AlluSinter ist ein Konstruktionsmaterial aus mit Aluminiumpartikeln hochgefülltem Nylon und eignet sich hervorragend für Anwendungen, bei denen gute mechanische und thermische Merkmale gefordert werden. Die kleine Körnung erlaubt eine hervorragende Detailtreue. Allusinter ist ein ideales Material sowohl für Konstruktions-, als auch für Elemente mit ästhetischen Zwecken. Aufgrund seiner guten Bearbeitungseigenschaften ist es besonders für Nachbearbeitungen wie Lackieren und Vakuum-Metallisierung geeignet.

Mechanical Properties Test Method English Metric
Tensile Strength X direction ISO 527-1/-2 - - - - - 48 MPa
Tensile Strength Y direction ISO 527-1/-2 - - - - - 48 MPa
Tensile Modulus X direction ISO 527-1/-2 - - - - - 3,800 MPa
Tensile Modulus Y direction ISO 527-1/-2 - - - - - 3,800 MPa
Strain at Break X direction ISO 527-1/-2 - - - - - 4%
Charpy Impact Strength (+23°C X Direction) ISO 179/1eU - - - - - 29 KJ/m2
Charpy Notched Impact Strength (+23°C X Direction) ISO 179/1eA - - - - - 4.6 KJ/m2
Flexural Modulus (23°C, X Direction) ISO 178 - - - - - 3,600 MPa
Flexural Strength (X Direction) ISO 178 - - - - - 72 MPa
Volume resistivity (X Direction) IEC 60093 - - - - - 3E12 Ohm*m
Thermal Properties Test Method English Metric
Temp. of Deflection under load (1.80 MPa, X Direction) ISO 75-1/-2 - - - - - 144°C
Temp. of Deflection under load (0.45 MPa, X Direction) ISO 75-1/-2 - - - - - 175°C
Vicat Softening Temperature (50°C/h 50N) ISO306 - - - - - 169°C
Melting Temperature (20°C/min) ISO 11357-1/-3 - - - - - 176°C
Other Test Method Value Available Colors
Density - - - - - 1.360 Kg/m3
Light Gray
Relative Permittivity (100Hz) IEC 60250 13
Relative Permittivity (1MHz) IEC 60250 10
Dissipation Factor (1MHz) IEC 60250 180 E-4
Surface Resistivity IEC 60093 5E14 ohm
Electric Strength IEC 60243-1 0.1 kV/mm
Shore D Hardness (15s) ISO 868 76

The information presented are typical values intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes.
End-use material performance can be impacted (+/-) by, but not limited to, part design, end-use conditions, etc. Actual values will vary with build conditions.
Product specifications are subject to change without notice.
The performance characteristics of these materials may vary according to application, operating conditions, or end use. Each user is responsible for determining that the material is safe, lawful and technical suitable for the intended laws and regulations. Zare makes no warranties of any kind, express or implied, including, but not limited to, the warranties of merchantability, fitness for a particular use, or warranty against patent infringement.
All Trademarks included in this document are property of the respective owner