ABSi



ABSi

ABSi ist ein idealer Werkstoff für die objektorientierte Modellierung, den funktionalen Prototypenbau und die unmittelbare digitale Produktion. Seine Zugfestigkeit ist höher als bei normalem ABS, während die durchsichtige Beschaffenheit Vorteile bei der Bewegungsüberwachung von Fluiden im medizinischen und in den Bereichen bietet, in denen das Durchscheinen von Licht verlangt wird, wie beispielsweise in der Automobilindustrie.

Mechanical Properties1 Test Method English Metric
Tensile Strength (Type 1,2”/min) ASTM D638 5,400 psi 37 MPa
Tensile Modulus ASTM D638 277,700 psi 1,915 MPa
Tensile Elongation ASTM D638 4.4% 4.4%
Flexural Stress (Method 1, 0.05”/min) ASTM D790 8,980 psi 62 MPa
Flexural Modulus ASTM D790 278,000 psi 1,917 MPa
Flexural Elongation ASTM D790 < 80% < 80%
IZOD Impact, notched (Method A, 23°C) ASTM D256 1.8 ft-lb/in 96.4 J/m
IZOD Impact, un-notched (Method A, 23°C) ASTM D256 3.6 ft-lb/in 191.1 J/m
Thermal Properties3 Test Method English Metric
Heat Deflection (HDT) @ 66 psi, 0.125" unannealed ASTM D648 188°F 86°C
Heat Deflection (HDT) @ 264 psi, 0.125" unannealed ASTM D648 163°F 73°C
Coefficient of Thermal Expansion ASTM D696 6.7E-06 in/in/°F 12.1E-05 mm/mm/°C
Glass Transition Temp. (Tg) DMA (SSYS) 240°F 116°C
Melt Point - - - - - - - - - Not Applicable2 Not Applicable2
Other3 Test Method Value Available Colors
Specific Gravity ASTM D792 1.08
Translucent Natural
Translucent Amber
Translucent Red
Flame Classification UL94 HB
Rockwell Hardness ASTM D785 108

1 Build orientation is on side long edge
2 Due to amorphous nature, material does not display a melting point
3 Literature value unless otherwise noted

The information presented are typical values intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes.
End-use material performance can be impacted (+/-) by, but not limited to, part design, end-use conditions, etc. Actual values will vary with build conditions.
Product specifications are subject to change without notice.
The performance characteristics of these materials may vary according to application, operating conditions, or end use. Each user is responsible for determining that the material is safe, lawful and technical suitable for the intended laws and regulations. Zare makes no warranties of any kind, express or implied, including, but not limited to, the warranties of merchantability, fitness for a particular use, or warranty against patent infringement.
All information contained in this document were supplied by Stratasys Inc. Copyright© 2013
All Trademarks included in this document are property of the respective owner